Dewalt dwe7491rs VS Bosch 4100-10

The WoodWork Zone reviews all products independently. When you buy via the links on our site, we may earn an affiliate commission at no cost to you.

Welcome to our review of two popular table saws, the Dewalt dwe7491rs vs Bosch 4100 09. As you may know, it can be difficult to choose the right one for you. This article is here to make the decision process easier. Learn the difference between Dewalt dwe7491rs vs Bosch 4100 09.

We will start by looking at what some consumers like about these table saws. Some people like that both are portable and lightweight, making them easy to carry around on construction job sites. 

Others like how easy it is to adjust the bevel on these table saws, which is something that can be especially helpful if you need to rip a large piece of wood in half with only one blade.

Each has its advantages and disadvantages. Is one better than the other? Grab a drink and a snack and read this article through to the end to find out!

Comparison Chart

PRODUCTDewalt DWE7491RSBosch 4100-10
Cutting Height10 Inch Blades3.18 inches10 inch Blades3.14 inches
Ripping Capacity32.5 inches30 inches
StandYesYes
Weight110 pounds60 pounds
FenceYesYes

Specifications

PRODUCTDewalt DWE7491RSBosch 4100-10
Max Depth Cut3 ⅛ inch at 90 degrees2 ¼ inches at 45 degrees3 ⅛ inch at 90 degrees2 ¼ inches at 45 degrees
Ripping CapacityLeft: 22 inchesRight: 32.5 inchesLeft: 8.5 inches Right: 30 inches
RPM48003,560
Dimension31 x 24.5 x 31 Inches27 x 32.5 x 13 Inches

What is a Table Saw?

A table saw is a type of power tool that includes a table on which to place the material to be cut, a blade that moves in a circular motion to cut the material, and a motor that moves the blade. 

The table saw has been around for over a hundred years, but a lot of people aren’t familiar with it. In this article, we cover the basics of a table saw, how to use it, and what makes a table saw a table saw.

Table saws are powerful, efficient, and easy to use. They allow woodworkers to perform more complex tasks, like cross-cutting longboards at the same time. 

Products Reviewed

Dewalt DWE7491RS

DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

The Dewalt DWE7491RS is a 10-inch table saw with an aluminum base. It has a powerful 15-amp motor that can deliver up to 4,800 RPM. The blade is designed for cutting through hardwoods and other types of wood. It has a sliding table that can be used for bevel cuts.

The Dewalt DWE7491RS is a contractor table saw featuring a saw blade with the ability to rotate from left to right. It has an integrated dust port, as well as a stand that can be assembled in one hour or less. 

This table saw is best for those who need to make many cuts per day, those who work on large projects, and those who need to cut off large amounts of material at one time. 

Bosch 4100-10

Bosch Power Tools 4100-10 Tablesaw - 10 Inch Jobsite Table Saw with 25 Inch Cutting Capacity and Portable Folding Table Stand

The Bosch 4100-10 table saw is a 10-inch, 10-inch fence, and a sliding table saw. It’s a powerful tool with a 4.0 HP motor and a 15 amp circuit breaker. It also has a 30-inch rip capacity. The Bosch 4100-10 comes with a blade guard, an integrated dust port, and a steel stand.

The Bosch 4100-10 table saw is best for those who need a powerful saw that can easily cut through wood. It’s also great for those who have a small workshop and need a saw that fits in a tight space. This table saw is best for those who only need to make a few cuts a day or those who are light users.

Significant Differences

The Bosch 4100-10 is a 10-inch saw with plenty of power. It’s only 60 pounds, making it easy to move. The blade is parallel to the table, which is what makes it perfect for cutting straight lines. 

The Dewalt DWE7491RS is also a 10-inch saw but with a 110-pound weight. It’s not as easy to transport, but it does offer more power than the Bosch 4100-10.

Both models are made out of magnesium, which makes them light and durable. They’re also both equipped with a leveling system that changes the angles of the blade to make angled cuts.

Ultimately, both of these table saws are top quality and will serve you well, no matter what project you have in mind. The decision will come down to what features are more important to you. 

If power is your top priority, then the Dewalt DWE7491RS is the better choice. If portability is what you’re going for, then the Bosch 4100-10 will be your best bet.

Feature Comparisons

Cutting Height

The Dewalt table saw features a cutting height of 3.5 inches, while the Bosch table saw has a cutting height of 3.25 inches.

Both of these products offer a cutting height of 3.5 inches, but the Dewalt is the taller of the two saws.

The Bosch table saw has a 3-inch cutting height, while the Dewalt table saw has a 3.5-inch cutting height.

A higher cutting height isn’t always better, but in this case, it is. The Dewalt will be able to cut harder materials at a higher thickness, which makes it an overall better choice for cutting materials.

Ripping Capacity

The Dewalt DWE7491RS has a ripping capacity of 12 inches. Meanwhile, the Bosch 4100-10 has a ripping capacity of 32.5 inches. It also has a rip fence measuring in at 27 inches while the Bosch 4100-10 has a rip fence measuring in at 23.5 inches.

The Dewalt DWE7491RS weighs in at 110 pounds while the Bosch 4100-10 weighs in at 60 pounds.

Stand

The Dewalt DWE7491RS has a built-in stand, which is convenient and saves space. The stand is very easy to set up and use. It also has rolling wheels which are convenient for a table saw that weighs in at 110 pounds.

However, it’s not as stable as the Bosch 4100-10. The Bosch 4100-10 has a two-tier double-X base and a 4-inch steel ball-bearing blade guard with a red safety lock.

Weight 

With a heavier weight comes a more solid and sturdy table saw. The Bosch 4100-10 weighs 92 pounds, while the Dewalt DWE7491RS weighs only 60 pounds. This gives the Bosch table saw considerable advantage in sturdiness and stability.

You’ll also want to take into account the controls. The Bosch 4100-10 has a more modern feel, with controls that are backlit for ease of use when you’re working at night. 

The Dewalt DWE7491RS has controls that are not backlit, which can be difficult to work with when you’re trying to keep your eyes on the blade.

The Bosch 4100-10 also comes with a stand that is more stable than the Dewalt DWE7491RS stand. This is because the Bosch stand has 4 wheels, while the Dewalt stand only has 2 wheels.

With these differences in mind, it’s clear that the Bosch 4100-10 is the better choice if you’re looking for a table saw with more stability and easy-to-use controls.

Fence

The fence on the Dewalt DWE7491RS is easier to adjust, but the Bosch 4100-10 has a larger table for more space.

The Dewalt DWE7491RS has a riving knife that’s easy to install and adjust. The Bosch 4100-10 only has the option of installing a riving knife, which makes it more difficult to install. 

The Dewalt DWE7491RS has a fence that is easier to adjust. But the Bosch 4100-10 has a larger table for more space.

Overall, the Bosch 4100-10 is better for those who need more space. If you’re looking for an easy-to-adjust fence, the Dewalt DWE7491RS is better for you. It all depends on what you need your table saw for!

Conclusion

Thanks for reading through our article comparing the Dewalt DWE7491RS vs Bosch 4100-10. First off, either of these devices will handle most of the jobs that you need to get done. 

We find that the Dewalt DWE7491RS offers a lot more power and accuracy than the Bosch 4100-10. It’s a better choice if you’re looking for something that can cut through more material with ease. 

The Bosch 4100-10 is the saw for you for ease of use and transportability. Either way, we feel that you’ll be satisfied with either choice.

If you liked this article about Dewalt dwe7491rs vs Bosch 4100 09, consider checking out these other articles below —

Sharing is caring!

Leave a Comment

carpentry-for-beginners-UV8KV8S

OUR BEST CONTENT IN YOUR INBOX

Subscribe to our weekly newsletter