Types of White Wood

The WoodWork Zone may collect a share of sales or other compensation from the links on this page. This comes at no additional cost to you, and all the prices and availability are accurate at the time of publishing.

Ever wonder what type of white wood is best for your next project? There are many types of different white wood that exist in the world. To help you decide on the best types of wood to use for your next project I have created this blog post with the information you need. 

Whitewoods have their own unique set of characteristics that depend on how they’re processed before being made into lumber products such as flooring and furniture. Some types are more durable than others–softer woods tend to scratch easily

What is Whitewood?

The wood from the American tulip tree or yellow poplar is known as whitewood, and it’s one of the world’s tallest hardwoods.  Its specific color is actually closer to a pale yellow, and it’s typically combined with other woods in millwork to create multicolored pieces for cabinets or furniture. When you’re searching for white wood products, look for poplar that has been kiln dried and milled into boards 1-3 inches thick.

What Are Different Types of White Wood

24 Pieces Plywood Board Sheets Basswood Thin Board DIY Wood Sheets for Christmas DIY Crafts Wooden Decoration Supplies (200 x 100 x 1.5 mm)

1. White Oak Wood

White oak is a type of white wood that’s similar to white pine. It has an easy grain pattern that works well for people who are new to working with wood. The color is usually off-white or creamy yellow in tone, but the strength is very good compared to most other types of lumber. White oak can last through extreme weather conditions even if it’s not treated with many different substances to extend its lifespan because nature provides it protection in the tree itself.

Characteristics

White Oak is a hardwood that grows in the eastern region of North America. It’s used for many things, especially furniture.

Also Read: Types of Oak Wood

2. Serbian Spruce Wood

The Serbian spruce tree is native to Serbia and Montenegro in southeast Europe near the Black Sea coastline where cold winds blow in from the sea year-round. These winds make everything colder, including soil, leaves, trunks, branches, and even the needles of this particular type of tree.

The Serbian spruce is a hardy wood that’s resistant to the cold and other environmental factors such as insects, salt spray from the sea, and fungal damage. The trees need to be harvested in December before they become too brittle so they’ll last for several years without falling apart under pressure or strain.

Characteristics

A unique characteristic of this specific type of hardwood is the relief pattern on its bark, which makes it perfect for carving or burning artistic designs into the surface.

3. Silver firs white wood

The silver fir is a very resilient tree found in the mountains of China and Eastern countries. Because it’s strong enough to survive harsh conditions, it’s perfect for white wood that can be used for furniture or other items such as toys that need to be made sturdily.

The best time to harvest the silver fir is when it’s about 20 years old because its bark gets very hard and thick at this point. The trunk also becomes thicker around this age, so harvesting will only cause minimal damage to the outer part of the tree and harm neither the inside nor outside in any way.

Characteristics

This particular type of white wood has many unique characteristics that make it worth using when creating projects where strength and resilience are needed. Often it’s used for decorative items, but it can also be cut down to make boards and other types of lumber where stability is essential.

4. Basswoods

Basswood is often referred to as American lime because it’s found growing in the eastern part of North America. It doesn’t have very many uses, but it can be cut into boards or used for other items that are needed to be light and soft due to the density factor.

The tree itself has heart-shaped leaves with serrated edges, so it’s named basswood because its leaves resemble a particular species of fish called White Bass or black bass. These types of fish have large mouths filled with sharp teeth that enable them to catch food easily when they’re young and small without worrying about competition from other types of fish in their ecosystem.

Characteristics

This type of wood is generally off-white or creamy yellow in color, but the grain pattern makes it easy to work, even for beginners. People can carve designs into basswood or use it in construction because it doesn’t splinter easily when pressure is applied from outside forces, which keeps its integrity intact while making a substantial project that will last a long time.

5. Yellow pines

Many of these trees are found in North America, especially the ones that grow along sunny paths with gentle breezes. They absorb sunlight easily and turn it into nutrients for growth, which happens quickly even when there’s plenty of shade nearby because the trees grow tall to reach more light. The leaves stay on the tree throughout most seasons but fall off in autumn after photosynthesis has already taken place inside them to provide energy for winter months when there isn’t much sunlight available.

Characteristics

The bark is silver-white in color with many ridges or lines separating areas of dark green on some branches. The leaves are oval-shaped, so they’re similar in shape to mountain Ash leaves on some types of Ash trees. This particular type is perfect for projects that require stability, especially those that are made to last a long time without having to be replaced.

Also Read: Types of Pinewood

Whitewood Grades

Whitewood comes in many different grades. Some grades of wood are softer and easier to cut or carve into shapes. Other types are more durable as far as moisture content is concerned as well as insect infestations from fungi that can slowly break down other types of lumber.

The sapwood of the tulip tree has a Janka hardness rating of 320 pounds, which is fairly low compared to most species of wood around the world. Heartwood, however, is much harder than most other types and it’s even harder than red oak and sugar maple. The same goes for white oak with a slightly higher Janka hardness at 345 pounds but not quite as high as heartwood, its own tree species.

What is Whitewood Used For?

8pcs Basswood Carving Blocks.Wood Blocks for Educational DIY Crafts Wood Carving Hobby Suitable for Beginners to Experts, with Blank Blocks of Unpolished Wood Block kit. 3 Sizes Whittling Wood

Whitewood is used primarily to make furniture. It can be used for handles on some types of tools, but carpenters generally prefer working with it. Most of the time you’ll find whitewood in cabinets because it’s durable and its unique color allows people to paint over any dents or marks on the surface without worrying about things showing through later on.

Whitewood doesn’t show scratches very easily.

It’s also used to make stairs and other types of large structures that require stability and strength without compromising size or weight. Sometimes furniture manufacturers will use whitewood in place of more expensive types such as red oak because the key characteristics are the same even though it’s cheaper to get from a tree farm than most others out there.

What Are The Benefits of Using Whitewood?

  1. Durability –  Several white woods are extremely durable. They will stand up to harsh weather movements and won’t easily be damaged by insects that burrow into the wood to eat it away. This type is ideal for building projects that need to last a long time without being replaced or maintained regularly.
  2. Properties  – Strength isn’t the only benefit of this particular type of lumber. It also is resistant to a lot of diseases that can happen with other types, including rot and insects with special diets. These trees grow quickly which means they don’t have a chance to develop minerals or nutrients during the growing season as well as some other types which adds strength and longevity if the wood has been properly dried and stored.
  3. Easy Maintenance –  People who want to spend time and money maintaining wood for their outdoor projects can save themselves a lot of time with whitewood, especially in areas with extreme weather. The wood doesn’t easily attract insects or develop rot from water exposure when finished properly, which makes it perfect for decks, porches, and other outdoor constructions that people want to use frequently and for many years without needing maintenance.
  4. Longevity –  DIY experts and professionals know that this type is perfect for creating long-lasting projects, especially those that undergo regular use. The trees grow quickly and don’t need much time to develop nutrients or minerals which adds strength and durability to finished products such as furniture, flooring, or even cabinets.
  5. Utility  – People who use outdoor projects and structures will find many uses for whitewood regardless of how often they use them or what purpose they serve. It doesn’t matter if it’s a deck, gazebo, lawn furniture, or another type of structure that can withstand the elements. People can enjoy their projects for years without worrying about the wood rotting from exposure or being destroyed by insects.
  6. Light Weight –  Both heavy and light projects can benefit from using whitewood. It’s a lot lighter than other types of lumber which makes it perfect for projects that require a wide variety of boards without adding too much weight to the structure or object that people are working on.
  7. Ideal for Decorating –   Whitewood can be used for a variety of projects that require people to add color to the wood. Its natural light brown color allows people to dye it with a number of different colors and apply a number of coats until they get just the right shade for their needs. Even if the wood is going to be exposed to harsh sunlight, whitewood absorbs colors easily and quickly.

Whitewood Cutting

Getting this type of wood down to the right size is easy when people use the proper tools. Solid carbide-tipped circular saw blades are best for these types of projects because they can be used with both soft and hardwoods. For most applications, a blade that’s at least 10 inches in diameter is ideal but it all depends on what type of structure people are working on. A 10-inch blade can cut up to a 2 1/4 thick board in one pass, which helps save time.

Painting White Wood

If people aren’t interested in keeping the natural look of whitewood for their project, they can paint it with latex paint or stain. This type of lumber absorbs paint more easily than any other type but doesn’t use oil-based or solvent-based finishes because they will soak into the wood and cause problems later on.

Also Read: Best Spray Paint for Wood

Finishing Whitewood

People who want to give their projects a nice, smooth look can use a sander with medium-grit sandpapers. If the wood is going to be exposed to water, people should seal it with a product that’s recommended for exterior structures or furniture. Few types of lumber need as little maintenance as whitewood and many DIY experts love to use it for outdoor projects.

Conclusion

People can create all kinds of projects with whitewood if they have the right tool for the job. Whether it’s a  cabinet, deck, gazebo, or any other type of indoor or outdoor structure, this type of wood is perfect for people who want to spend time enjoying their construction instead of maintaining it each year.

So, what type of white wood do you want to use for your next project? I hope this blog post has helped you decide. If not and you need more help deciding which types of woods are best for certain projects feel free to comment below and check back for more informative articles on all of your favorite topics too.

Other Recommendations:

Sharing is caring!

Leave a Comment

carpentry-for-beginners-UV8KV8S

OUR BEST CONTENT IN YOUR INBOX

Subscribe to our weekly newsletter

Sharing is Caring

Help spread the word. You're awesome for doing it!